Ewe. Ii-flowmeter ze-Ultrasonic zinokudityaniswa ngokulula kwiinkqubo ze-PLC okanye ze-DCS ngokusebenzisa iziphumo zesignali zoshishino eziqhelekileyo kunye neenkqubo zonxibelelwano.
Uninzi lwee-flowmeters ze-ultrasonic zixhasa iindlela ezininzi zokukhupha, ezifana ne-analog output ye-4–20 mA, i-pulse output, i-relay (alamu) output, kunye nonxibelelwano lwedijithali lwe-RS485. Ezi ndawo zokunxibelelana zivumela unxibelelwano olungenamthungo kwii-PLCs, iinkqubo ze-DCS, ii-data loggers, kunye nezinye izixhobo zolawulo okanye zokubeka esweni.
Kunxibelelwano lwedijithali, ii-ultrasonic flowmeters zihlala zixhasa i-protocol ye-Modbus RTU ngaphezulu kwe-RS485, okuvumela ukuhanjiswa kwedatha ngexesha langempela okuthembekileyo kumgama omde. Izinto eziphambili zenkqubo ezifana nesantya sokuhamba ngokukhawuleza, ukuhamba okupheleleyo, indlela yokuhamba, kunye nesimo sokuxilonga zinokufundwa ngokuthe ngqo yi-PLC okanye i-DCS.
Isiphumo se-analog esingu-4–20 mA sidla ngokusetyenziselwa ukujonga ukuhamba komoya ngexesha langempela, ngelixa iziphumo ze-pulse zifanelekile kwizicelo ze-totaling flow okanye ze-batching. Iziphumo ze-relay zinokucwangciswa kwii-alamu, ezinje ngokuhamba komoya okuphezulu, ukuhamba komoya okuphantsi, okanye izibonakaliso zempazamo yenkqubo.
Ngokudibanisa i-ultrasonic flowmeter kwinkqubo ye-PLC okanye ye-DCS, abasebenzisi banokufikelela ekubekeni esweni okuphakathi, ukufumana idatha ekude, ulawulo lwenkqubo oluzenzekelayo, kunye nokusebenza kakuhle kwenkqubo. Ukufakelwa kweentambo ngokufanelekileyo, uqwalaselo lweeparameter, kunye nokuseta unxibelelwano kufuneka kwenziwe ngokwencwadi yesikhokelo sesixhobo kunye neemfuno zenkqubo ye-PLC/DCS.
Ixesha leposi: Jan-29-2026